Make sure to clean up the edges of the sight guard casting,,,,,,    if it doesn't line up properly and you clamp it down you will break it !!!!!!! https://www.youtube.com/watch?v=qSZePjoglwY

Starting off with an vintage 1915 Webley No1 Mark 1 for EE3 !!! First thing is first , getting it laser scanned for 3d geometry.............................. [video width="1920" height="1080"...

IMG_2212 IMG_2209 IMG_2203 Screen shots of the Mando blaster.....   I believe the prop master used the Bergmann 1894 for reference....  With no way of getting a real vintage prop or a Bergmann (since they extremely rare lol) this project will rely on...

   the spray paints you will need make sure to sand and clean up the gate mark from the casting   texture and the bronze color first.....  tape off the brass areas no need to paint those and they dont get texture   Then spray with the bronze...

IMG_8850 IMG_8992 IMG_9092 This is what were going for !!!   Next lets laser scan the vintage mauser to get some geometry [video...

To get started i need to create a easy way of mounting the lee enfield original british ww1 smle cup grenade launcher ... The real vintage parts are very rare and exp$$$   should be able to create a real steel replica for around 100.00$ We are going to need...

Here is all three ,, the kit, the basic and the full weathered https://www.ebay.com/itm/283268561268 https://www.ebay.com/itm/123500966570 https://www.ebay.com/itm/283268567611   A little machine time to prep the parts for the build....   i do this with...

IMG_2995 IMG_2998Flash hiders for these two are similar but the rear grooves seem to be somewhat random on the bunker version... the stem bridge seem to be a little more evenly spaced... IMG_2995 IMG_2998  

Wanted to post the new version of the esb mounts now that i feel like i have them correct....